Tait TM8260, Инструкция по установке и программированию

Страница: 34 / 52

34 Installing a Dual-Radio System TM8260 Installation and Programming Guide
© Tait Limited October 2014
Installing the
Remote Cable
Figure 3.10 contains an overview of the connection between the radio
bodies and the control head.
If a radio body does not have link J4 removed, or you cannot identify the
correct radio body to use, you will need to disassemble one or both inter-
faces. See
“Removing the Body Interface” on page 22 for more infor-
mation.
1. Attach one end of the control-head remote cable to the innermost
port of the radio body with link J4 removed.
The outermost port of this radio body connects to the other radio body.
2. Attach the other end of the control-head remote cable to the rear port
of the control head remote interface.
3. Install the cable grommets. See “Removing and Installing
Grommets” on page 15 .
Figure 3.10 Connecting radio bodies to control head with graphical-display
body with link J4 removed
to radio
body with
link J4 fitted
outermost
port
innermost
port
CH port
control head
control head remote
cable TMAA04-01
(6m/19.6ft.)