TB9100 Installation and Operation Manual
Maintenance
33
© Tait Electronics Limited May 2006
3
Maintenance
The TB9100 is designed to be very reliable and should require little
maintenance. However, performing regular checks will prolong the life of
the equipment and prevent problems from happening.
It is beyond the scope of this manual to list every check that you should
perform on your base station. The type and frequency of maintenance
checks will depend on the location and type of your system. The checks and
procedures listed below can be used as a starting point for your maintenance
schedule.
Performance Checks
We suggest you monitor the following operational parameters using the
CSS:
■
VSWR
■
DC input voltage, especially on transmit
■
receiver sensitivity
■
the setting of the receiver gate opening
■
any temperature alarms.
These basic checks will provide an overview of how well your base station
is operating.
Reciter
There are no special maintenance requirements for the reciter. You may
choose to recalibrate the TCXO frequency periodically. Refer to the
Calibration Software documentation for more details.
PA
There are no special maintenance requirements for the PA.
PMU
There are no special maintenance requirements for the PMU. However, if
you are using battery back-up, you should check the batteries regularly in
accordance with the manufacturer’s recommendations.
Ventilation
The TB9100 base station has been designed to have a front-to-back cooling
airflow. We strongly recommend that you periodically check and maintain
the ventilation requirements described in
to ensure a long life and trouble-free operation for your base station.
Cooling Fans
The cooling fans have a long service life and have no special maintenance
requirements. You can use the CSS to configure the base station to generate
an alarm if either of the cooling fans fail. Refer to the CSS documentation
for more details.
Содержание TB9100
