Tait T2000-A75, Руководство по эксплуатации

Страница: 27 / 38

November 2001 M2256-000-00-051 27
FUNCTION (PC to A75)
The FUNCTION command provides access to some miscellaneous functions.
Example
An example of a ‘Function’ message is: f0291CE
[IDENT]
f
[PARAMETERS]
[FUNCTION] [QUALIFIER]
[PARAMETER] Function
[FUNCTION] A single ASCII hex character representing the required function category.
[QUALIFIER] A single ASCII hex character representing the action to be taken. The meaning of
[QUALIFIER] is dependent upon the value of [FUNCTION].
[FUNCTION] = 6 TMODE Filter control
enables or disables filtering out all PROGRESS messages
when in Transparent mode.
[QUALIFIER] = 0 : disable TMODE Filter
[QUALIFIER] = 1 : enable TMODE Filter
[FUNCTION] = 9
Tx/Rx control
forces the T201X radio into a transmitting or receiving state.
[QUALIFIER] = 0 : change to Rx state
[QUALIFIER] = 1 : change to Tx state
Message Field Parameter
Entered at
terminal
[IDENT] FUNCTION. f
[SIZE] Size of parameter field 02
[PARAMETERS] [FUNCTION] = 9 to control the Tx/Rx state of the radio 9
[QUALIFIER] = 1 to start the radio transmitting 1
[CHECKSUM]
Refer to the
Calculating the [CHECKSUM]
section
CE