Shandong Taishan Sports Equipment Co.,Ltd
Web : www.taishansports.cn
5) Fasten the outrigger protective cover to the front end of the outrigger with a
hook and loop fastener;
6) Unfolding and folding of the arm:
1. When unfolding, at least two people push up the rear post until the rear post is
vertical to the ground. During the process, the base of the basketball stand will
then rotate upward and land. After unfolding, use a hook-type wrench to lock the
adjusting sleeve; use the hexagon socket flat head screw M8×20 to install the
front pillar protective cover on the basketball stand, and all the other protective
covers are connected to the basketball stand base with buckles, and finally
②
Place the protective sleeve insert into the vacant position, as shown in Figure
Figure 7 Sheath installation
2) Contrary to the unfolding process, first remove the protective cover inserts
from the front protective cover; then remove the protective covers on both sides
and stick them to the base (as far as possible to ensure that the front protective
cover will not interfere with it after being folded); use a hook Type a wrench to
