APPENDIX
Appendix-F Software
Upgrade
F-1 Overview
The XSTREAM 1300 uses a FLASH memory as the system ROM, and it
provides the software upgrade function. There are 2 steps to execute the
software upgrade function :
#
Download the software via the craft port from the PCs or terminal
program to the XSTREAM 1300.
#
FLASH download and system reset.
F-2 Craft Port Download
The Craft Port could assist the system software upgrade function for a
standalone termination unit like Tainet’s XSTREAM 1300. The PCs or
terminals with COM port could be connected to the XSTREAM 1300
via the craft port. The procedures for this connection are :
F-3 Procedures
1. Make sure that PCs or Terminals of the COM port setting are set to
#
115200 baud rate
#
8-bit characters
#
No parity
#
1 stop bit
#
Hardware flow control
#
ANSI terminal type
#
1K-XMODEM file transfer protocol
2. Plug the 9-pin of the terminal cable to both ends (the XSTREAM
69
Содержание Xstream 1300 Series
