Tainet Xstream 1300 Series, Руководство пользователя

Страница: 52 / 86

CHAPTER 5 SYSTEM TERMINAL OPERATION
5.1 Overview
The system terminal may be attached to craft port of the XSTREAM 1300
through the RJ-45 jack on rear panel. The craft port is a terminal device with
asynchronous protocol supported. On the other hand, the COM port interface
of the PCs or Terminals allows users to connect the 9-pin end of the terminal
cable into COM port. The communication parameters are set to speed 9600
BPS, 8 data bits, no parity, and 1 stop bit format. User can use any terminal
emulation program to set up the XSTREAM 1300 via craft port.
5.2 Connection
The craft port operation of the XSTREAM 1300 is similar to a normal PC. To
view the whole operation, user can utilize a PC monitor instead of the LCD
panel.
5.3 Keyboard
The keyboard is used to select and manipulate the basic operation of the
XSTREAM 1300 as following:
#
Arrow Keys (Up, Down, Left, and Right)
#
Number Keys (1 ~ 9) to select items
#
Enter or Return Key (make the selection of each operation)
#
Space Bar (Used to change a highlighted field and bring up next choice)
#
Special Function Keys
%
Ctrl-R (Refresh the current screen with the original values)
%
TAB (Choose Remote or Local System Mode)
%
ESC (Quit and out of the operation)
40