Taiden hcs-8300 Скачать руководство пользователя страница 80

Страница: 80 / 255

3.3.3 Connection

3.3.3.1 Connecting to the CMU or the EMU

The HCS-8335 series economical multimedia terminal

is equipped with a 1.5-meter 6P-DIN cable with a

standard male connector. To connect to the HCS-8300

CMU or the HCS-8300 EMU, just connect the male

connector of the first terminal to the output of the main

unit.

If there is a long distance between the multimedia

terminal and the CMU (EMU), CBL6PS extension cable

can be used. One end is equipped with a 6P-DIN male

connector and the opposite end with a female

connector. Just connect the female connector of the

cable to the next multimedia terminal, and connect the

male connector to the output of the main unit.

Figure 3.3.3 HCS-8335 series economical multimedia

terminal connected to the CMU/EMU

Neither the replacement of multimedia terminals nor

cable faults between multimedia terminals will affect

the other terminals if “Closed Loop - Daisy Chain”

connection topology is selected. “Closed Loop - Daisy

Chain” connection, achieved by closing the loop of the

daisy-chained units, increases system reliability. To

obtain “Closed Loop - Daisy Chain” connection, just

connect the last multimedia terminal back to the CMU

or the EMU with a CBL6PP extension cable (the cable

features a 6P-DIN male connector at each end). In

HCS-8300 series system, the congress main unit can

realize a “Closed Loop - Daisy Chain” connection, but

only one – extension units do not offer this feature.

Figure 3.3.4 “Closed Loop - Daisy Chain” connection

between the CMU and HCS-8335 series economical

multimedia terminals

3.3.3.2 Connection between congress units

The HCS-8335 series economical multimedia terminals

are daisy-chained easily and conveniently by dedicated

6P-DIN cables.

When connecting to another multimedia terminal, just

connect the 6P-DIN standard female connector on the

0.6-meter cable of the unit to the 6P-DIN standard male

connector on the1.5-meter cable of the next unit.

Figure 3.3.5 “Daisy-chain” connection between

HCS-8335 series economical multimedia terminals

Содержание hcs-8300
































































































































































































































































Результаты поиска

Содержание hcs-8300

Отзывы:

Бренды по названию

Популярные бренды

Taiden hcs-8300, Инструкция по установке и эксплуатации

Результаты поиска

Содержание hcs-8300

Отзывы:

Бренды по названию

Популярные бренды