Taiden HCS-5300MA/80, Инструкция по установке и эксплуатации

Страница: 48 / 117

2.5.34 About Dante
Dante information includes: Dante version, device version
and device name, as shown in the following figure - press
any button to return to the upper level menu.
2.5.35 Volume Control
The volume can be adjusted by the volume knob on the
CMU front panel - LINE IN 1 VOL. adjust knob and
MASTER VOLUME adjust knob. Meanwhile, the
corresponding volume indicator will be displayed on the
LCD, as shown in the following figure:
2.5.36 Connecting to PC
When connecting the CMU to the PC, its front panel will
be locked and setup operation cannot be accessed, as
shown in the following figure:
2.5.37 Power Management
Press and hold the “STANDBY” button to enter power
management interface, as shown as the following figure:
a). Press the “

/

” button to select “Power Off” or
“Setting”;

If “ Power Off ” is selected, the main unit switches to
standby mode;

If “ Setting ” is selected, then select enable the
“STANDBY” button or not;
b). Press the “

/

” button to select “Disable” or
“Enable”;

If “ Enable ” is selected, power on through the
“POWER” switch and the “STANDBY” button;

If “ Disable ” is selected, power on directly through
the “POWER” switch;
c). Press the “MENU” button to save and return to the
upper level menu.
Note:

When power down the main unit, please press
and hold the “STANDBY” button to enter power
management interface, then select “Power Off ”
and press the “MENU” button to confirm. Please
do not use the switch button on the back of the
main unit to shutdown directly; otherwise, it may
lead to startup error.
36