Taiden HCS-5300MA/80, Инструкция по установке и эксплуатации

Страница: 24 / 117

Front panel:
1. “STANDBY” button
2. “MENU” button

The LCD displays the initial user interface: press
this button to enter the LCD set-up menu;

The LCD displays the set-up user interface: press
this button to select the highlighted item or enter
the submenu;

The LCD displays the network configuration: press
this button to select/deselect the numeric value.
3. “

” (Left) button

In the set-up interface of the LCD menu, press this
button to cursor to the left.
4. “

” (Right) button

In standby state, press this button to select the
number of maximum active microphones;

In the set-up interface of the LCD menu, press this
button to cursor to the right.
5. “Exit” button

In standby state, press this button to select the
operation mode of the microphones;

In the set-up interface of the LCD menu, press this
button to exit the current menu.
6. LINE IN 1 electric level adjustment knob
7. A type USB interface

To plug-in a USB stick.
8. Mini USB interface

For connecting to PC.
9. “MASTER VOLUME”

Knob to adjust the master volume of the floor audio
channel for the conference units.
10. Microphone operation mode indicators
(“OPEN”/“OVERRIDE”/“VOICE”/“APPLY”)

Corresponding indicator lights up according to
selected mode;

All indicators are turned off in APPLY mode.
11. Indicators of maximum active microphone
number (1/2/3/4)
12. Menu display

256×32 LCD, displays main unit status and
configuration menu.
13. Monitoring earphone interface

Earphone jack (Ø 3.5 mm).
Backside:
14. Ethernet

For communication between the conference
main unit and the PC under TCP/IP protocol to
realize remote controlling; furthermore, it
enables remote controlling by wireless touch
panel through central control system.
15. Interpreter Unit interface

For connecting to interpreter unit;

For connecting to HCS-4100/50 series Wired
Congress Unit.
16. Transceiver interfaces (1-6)
17. Video switch interface

When cooperating with video switch and dome
camera, auto video tracking can be realized;

Connect to a HCS-3316HDB dome camera
(Connector: RS422; SW1: 1;
Baudrate: 9600;
Ethernet protocol:
PELCO-D).
18. Fire alarm linked trigger interface
When the Alarm Setting in main menu is on:

Connected: all conference units will be switched
off and display “ALARM”;

Unconnected: conference units will return to the
status preceding “ALARM”.
19. HF out (BNC socket)

For connecting to HCS-5100T digital infrared
radiator.
20. Power supply
21. Mains switch
22. “LINE OUT 1” (3 cord XLR balanced output)
23. “LINE IN 1” (3 cord XLR balanced input)
24. “LINE OUT 2” (RCA)
25. “LINE IN 2” (RCA)
26. RS-232C port

"COM" port is used for connecting to a central
control system for central controlling, as well as
for system diagnosis.
27. Simultaneous interpretation outputs (0-7)

For recording.
28. Dante interface

Connecting the conference main unit to the
Dante network to transmit audio signals.
12