2
1. Read the manual before you use the product
2.
Use the product only as specified, or the protection supplied by the product can
be compromised
3.
If fluids are spilled on the product, turn the system off immediately by pulling the power
supply out of the electrical outlet
4.
In case of fire close to the microscope, please turn off and disconnect the system
5.
Do not touch the light source. It gets hot when using the product
6.
Do not look directly into the light source
7.
You must not discard this electrical/electronic product in domestic household waste
Please dispose at your local recycling centre
8.
Avoid subjecting the lens to sharp or hard objects
9.
Please do not connect the microscope, if visible damages appear
10.
When applicable connect the power plug to a grounded power outlet
11.
Do not dismantle any parts of the microscope, except where noted in the manual
12. Never disassemble or clean internal optical surfaces
13.
Use only the power supply provided from TAGARNO
14.
Always turn off the system before unplugging, when possible
WARNINGS
Read all safety information before you use the product
Please pay attention when you see the warning label on the product
The product is a digital magnifying system consisting of a camera unit, PCBs, mechanical
parts and a power supply. The product is intended for marketing worldwide and is designed for
manual visual inspection
INteNded uSe
Warning: This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take appropriate measures.
tIPS
1.
When applicable, use both hands to move the XY Table
2.
When applicable use both hands to adjust the height of the product
3.
Avoid touching the lens glass
4.
Place the microscope near a wall outlet where the plug can be easily unplugged
WARNING! Laser radiation when turned on
Power must always be turned off during maintenance
Use the product only as specified or hazardous laser radiation exposure can occur
Radiation specifications:
Class ll laser pointer with 1mW max output at 650-660nm.
The label is placed on the product.
3. Tips
1. inTenDeD use
2. waRninGs
4. laseR pOinTeR waRninG
