Taga TSF-002, Инструкция по эксплуатации

Страница: 4 / 8

4
Installation
I. FEET and SPIKES
Attach the spikes and the top pads to all 4 feet as shown in the figure.
To avoid air leak from the cabinet, screw 4 bolts (D) into the remaining
4 empty threaded sockets on the bottom of the speaker.
Attach the feet while the speaker is still in the carton (A1) or after the speaker is
removed from the carton (A2). Using 2 bolts (D) screw in each foot securely into the
threaded sockets located at the bottom side of the speaker as shown in the figure (pla -
ce the speaker in A3 or A4 position).
II. SPIKES only
Install the spikes (C) while the speaker is still in the carton (A1) or after the speaker is
removed from the carton (A2). Screw in the spikes into the threaded sockets located
at the bottom side of the speaker as shown in the figure (place the speaker in A5 or A6
position). The outer sockets are recommended for better speaker stability.