Taga TSF-002, Инструкция по эксплуатации

Страница: 3 / 8

3
Introduction
TheTSF-002 feet and spikes may be supplied with your speaker or separately.
For new speakers - before unpacking!
To prevent damage to the speaker choose one of the below
installation options:
A1 - install the feet and spikes, while the speaker is still in the
carton. Place the carton with the speaker on the floor in the
upside down position and open it from the bottom and remove the
protective bag from the bottom of the speaker or;
A2 - take out the speaker from the carton without removing it from
a protective bag. Place the speaker securely on a stable surface in
a horizontal position above the floor level. Remove the protective
bag from the bottom of the speaker.
Two installation options for your choice:
I. To install feet and spikes or;
II. To install the spikes only
TAGA Harmony recommends the first option.
Note! The actual speaker shape and the placement of feet and spikes may vary from
the ones shown in the figures.
Required tool (not supplied with this product)- cross screwdriver.
Bolt M8 (x8)
D
Top pad (x4)
B
Content (set for 1 piece of speaker):