background image

Attendant Features

231

T207M, T208M, T207M/NP, T208M/BL User Guide

System Features

 5.  Press 

SPKR 

or 

[Exit]

 to terminate.

The following table defines the special codes that may be used as part of the outside number.

NOTE! 

The number of digits that can be programmed, including dial codes, is limited by the Coral 
(defined system-wide). If you try entering a longer digit string than allowed the system will give the 
error message 

LENGTH EXCEEDED

, and programming will stop.

Codes

Description

*x

Delay dialing by X seconds (x = 1 to 9)

#0

Stop dial (end of outside or network number)

#1

Outpulsing wait period during which user is able to dial any number of digits

#2

All digits following will be Dial Pulse

#3

All digits following will be Touch-Tone Dialing (DTMF)

#4

Inhibits display (for Call Accounting System and key set display)

#5

Enables display (for Call Accounting System and key set display)

#6

Wait for second dial tone

#8

Display ‘_’ (for Call Accounting System and key set display)

#9

Calibrated Opening on trunk (FlashTk)

**

Dial * out

##

Dial # out

Содержание T207M/NP













































































































































































































































































































Отзывы: