Tadiran Telecom FlexSet 280, Руководство пользователя

Страница: 21 / 132

Coral Terminal Equipment
1-9
Fl
ex
Set
In
stall
ation
1
Consult the Program Interface Reference Manual for instructions on the database
programming required when installing a FlexSet. The following are the parameters
which may be set:
General System Parameters Applied to all Keysets in the System
System Sizes
_______________________________________________ (Route: SIZ)
The system database allocates resources to manage the operation of (8/16/24)SFT,
(8/16/24)SFT Office, (4/8)SA8F Office, (4/8)SA16F Office, (4/8)S8F Office,
(4/8)S16F Office, (8/16)SFTipx, (8/16)SFTsl and 8F8Ssl peripheral cards based on the
number of FlexSets that these cards are able to support. An 8 port card supports up to
8 keysets, a 16 port card supports up to 16 keysets and a 24SFT card supports up to 24
keysets.
Verify that System Sizes allocates sufficient resources to accommodate the total
number of FlexSets provided by all cards installed in the system. If insufficient
resources have been allocated in
Sizes , the entry must be increased or the keysets will
not initialize.
KEYSETS_1
Set this parameter to accommodate the appropriate number of
FlexSet 120/120D/120L/120S/121S
(and CPA, iVMFipx, IPC/SFC/uCMC, EKT1XX, VDK121, DKT21XX, DKT1XXX, DST).
KEYSETS_3
Set this parameter to accommodate the appropriate number of
FlexSet 80S/80P/280/280D/280D-Z/280D-HS/280S/281S/APDL
(and EKT3XX, VDK321, DKT23XX, FKT, GKT and APDL).
PEM/DPEM
Set this parameter to accommodate the appropriate number of FlexSet 40B
(and DPEM, PEM) modules if installed..
4 Database Programming
Modification of the System Sizes initializes the entire system database, and requires the
re-entry of all database information after Sizes have been modified.