Tadiran Telecom Coral Sentinel Pro, Инструкция по установке и справочное руководство, Страница: 46 / 72

36 Coral Sentinel Pro Web Portal Sentinel Pro Installation Procedure and Reference Manual - for Coral IPx / FlexiCom
Configuring the Sentinel
Pro (Setup)
5
Table 9 Sentinel Pro
Basic Configuration
Parameter Description
Stand Alone
Mode If the Sentinel Pro operates in stand-alone mode, it does not
register with its Call Agent (Coral UGW card, UGW-E card,
PUGW-2G card, or PUGW card).

For networks including only MGCP endpoints, select No.
Public Self IP
Address The public (global) IP address of the Sentinel Pro used for
accessing it from outside of the subnet.
Private Self IP
Address The private (local) IP address of the Sentinel Pro unit used for
accessing it within the subnet.
The default value is 192.168.1.9.
Net Mask The net mask used to identify the subnet.
The default value is 255.255.255.0.
Default Router
Address The IP address of the router connecting the Sentinel Pro to the
outside world.
WAN RTP Base
Port (XXXX
ports) The lowest port number in the range of XXXX ports used for
RTP transmission.
The port range depends on the Sentinel Pro model and the
Coral version:

Sentinel Pro 10 * uses 200 ports for Coral Version 14 and
80 ports for Coral Version 15 or higher.

Sentinel Pro 25 uses 500 ports for Coral Version 14 and
200 ports for Coral Version 15 or higher.

Sentinel Pro 75 uses 1500 ports for Coral Version 14 and
600 ports for Coral Version 15 or higher.

Sentinel Pro 150 uses 2420 ports for Coral Version 14 and
1200 ports for Coral Version 15 or higher.
Example: If this field is set to 6000 for a Sentinel Pro 150
operating with a Coral Version 15 (XXXX=1200), the ports
6000-6199 are used for RTP transmission.
* Sentinel Pro 10 - discontinued, no longer produced