Tadiran Telecom Coral IPx Office, Руководство по установке и аппаратным средствам, Страница: 155 / 510

Coral IPx Office Installation Manual External Connections
5-17
Power Fail (PF)
Tr
ans
fer
Ci
rc
ui
ts
5
5.4
Power Fail (PF) Transfer Circuits
With the installation of trunk cards to support the PF (Power Fail) transfer option, four
trunks per trunk card may be directed to station sets if power to the Coral IPx Office
system is interrupted. This arrangement, referred to as power failure transfer,
completely bypasses the system, allowing specific stations to originate outgoing calls
and/or continue answering incoming calls.
0
Stations
The SLT (single line telephone) set can be used as a power failure station. Figure 5-6
illustrates wiring interconnections between the trunk card, station card, and a single
line station set.
Coral FlexSet cannot be used as power failure stations.
Trunks
In the Coral IPx Office system, the following analog trunk peripheral cards support
power fail transfer:
„
The following four-trunk cards each provide four (4) ports with PF transfer
connections:
4T Office and 4T-CID Office (in slots 10-11)
„
The following eight-trunk cards each provide four (4) ports with PF transfer
connections:
8T Office and 8T-CID Office (in slots 2-3 and 4-5)
NOTE : Only circuits 2, 3, 4, and 5 support power failure transfer connections.
0
...................................................................................................
1 Physical Connection