manualshive.com logo in svg

Tadiran Telecom Coral IPx 800 Series, Инструкция по установке и справочник по аппаратной части, Страница: 324 / 400

Поделиться
Скачать
Tadiran Telecom Coral IPx 800 Series Скачать руководство пользователя страница 324

7-10

 

Coral IPx 800 Installation Manual

PS

19 D

C

 Power Sup

ply U

nit

7

The PS19 DC power supply is inserted in the extreme left slot of the card cage. Before 

installing the power supply, verify that the ring frequency configuration jumper, JU1, 

is set to the correct frequency (20 or 25Hz). See 

page 7-9, Ringer Frequency Adjustment

.

To Install the Power Supply

4.

Verify on the cage rear panel that the POWER SUPPLY DUPLICATION connector 
is not in use. 

5.

Verify that the PS19 DC power switch is turned OFF.

6.

Position the two guide ridges (located on the right panel of the power supply, at 
top and bottom) into the card edge guides corresponding to the POWER SUPPLY 
slot (labeled on the bottom of the card cage).

7.

Slide the PS19 DC gently but firmly, until fully inserted into the card cage. A slight 
resistance should be felt as the multi-pin connectors engage at the rear of the 
power supply and backplane.

 

Do not force the power supply into the card cage. Irreparable damage may occur 
if the multi-pin connectors misalign while attempting to insert the unit into the 
card cage. If more than slight resistance is encountered, partially slide out the card 
from the cage and verify the alignment of the guide ridges with the card edge 
guides. If alignment appears to be correct, remove the card from the slot and 
inspect the multi-pin connectors for bent pins and debris in the pin holes.

4

Installation

Connecting the POWER SUPPLY DUPLICATION connector (located on the cage rear 

panel) for PS19 DC power supplies will result in damage to the system. This connector 

is only used with the PS19 DC-D power supply, see 

page 7-28, Connecting the Power 

Supply Duplication Cable between Two Cages

. Do not use this connector when the 

PS19 DC power supply is installed.

Do not insert or remove the power supply unit from the cage when turned ON. 

 

Sudden power surges could damage system components.

Содержание Coral IPx 800 Series

















































































































































































































































































































































































































Отзывы:

Нет отзывов