Tadiran Telecom Coral IPx 800 Series, Инструкция по установке и справочник по аппаратной части, Страница: 275 / 400

Cage Description
6-35
Cage D
escri
ptio
n an
d In
stall
ati
on
6
0I
There are six labels on the cage: four on the rear panel, one on the bottom of the free
space, and one in the inside of the door. See
Figure 6-36
and
Figure 6-37
.
Surge Arrestor Warning Label (B)
The red warning label on the rear panel warns against installing any telephony
equipment that is not protected by a surge arrestor. For further information, see
page
5-14, Surge Arrestor Magazine Mounting
.
Power Rating Label (C)
Figure 6-36
displays the label on the cage where the power wires are fed into the
system. The Coral IPx 800 cage can be powered by any of the following power sources.
For further information, see:
„ PS19 DC (DC Power Supply) Specifications, on page 7-16
„
PS19 DC-D (DC Power Supply-Duplication) Specifications, on page 7-37
„
PS19 AC (AC Power Supply) Specifications, on page 7-52
FCC Compliance Label (D)
The FCC compliance label states the rules under which the equipment was tested and
the terms of use.
Nameplate Label (E)
The nameplate includes the name of the cage (IPx 800M and IPx 800X) as well as the
CE approval mark.
Static Dissipation Warning Labels (S)
The static dissipation warning labels alert the technician to the presence of static
electricity that could damage the circuitry within the system. See
Figure 6-37
. Always
wear a static dissipating wrist strap before handling internal components of the cage.
For further information, see
page 2-37, Inserting the Coral Circuit Cards into the Cage
.
10 Cage Labels