Tadiran Telecom aeonix TGW4, Руководство пользователя

Страница: 58 / 141

User Manual
T G W S IP -F X S /F S O G a te w a y S e rie s
42
Tadiran Telecom
The acknowledged alarms will not be displayed but be kept in the security event log.
Line
2.3
2.3.1 Phone Number
The content below is only applicable to gateways with FXS ports.
After login, click Line > Batch Configuration (Phone number) to open the configuration interface.
Configuration Interface for
Batch Configuration (
Phone Number) Figure 2-15
Table 2-13 Configuration Parameters of
Batch Configuration (
Phone Number)
Name Description
FXS 1st line No. This number is used for the batch setup of subscriber line.
Click Batch after filling in initial number, the number of Line 1 adopts initial number; that of
Line 2 increases 1 progressively based on that of Line 1, and so on.
ID n Fill in the telephone number associated with the subscriber line n (FXS port). This should be
manually performed if Batch mode is not used.
2.3.2 Subscriber Line Features
The content below is only applicable to gateways with FXS ports.
After login, click Line > Configuration to open the configuration interface.