6
TOGGLE SWITCHES
Each switch can be assigned to control one of a variety of functions as desired and described throughout
this manual. The identifi cation of each switch by letter is marked on the Tx. The factory default switch
assignments are as follows:
A
B
C
D
E
F
G
H
I
J
Switch
3-position
3-position
3-position
3-position
3-position
2-position Momentary
3-position
2-position
Sweep Lever
Sweep Lever
Type
Ch2 Elevator Dual-rate
Flaps
(No Setting)
Aileron Dual-rate
Rudder Dual-rate
Trainer
(No Setting)
(No Setting)
(No Setting)
(No Setting)
Default Function
Airplane
Timer Control
Gyro Gain
(No Setting)
Aileron, Elevator, & Rudder
Dual-rates (All)
Normal / Idle-up
Throttle Cut
(No Setting)
Throttle Hold
(No Setting)
(No Setting)
Default Function
Helicopters
The factory default screen and menus will be for airplanes. See the next section for navigating and changing
menus for model type and other functions.
LCD contrast and backlight intensity are adjustable for optimum viewing. Six pushbuttons navigate
the menus and settings. Single button pushes will result in a single incremental adjustment on-screen.
Holding a button for a short time will result in slow scrolling of adjustments; continued holding will result
in fast adjustments.
LEFT SIDE BUTTONS
Press any time to see the servo position screen. Indicators for certain channels will change
depending on model type, wing type, etc. Moving any Tx control will graphically be shown
on this screen. When setting / adjusting mixes to determine if the mix is as desired, set the mix and then
view this screen. Move all controls to determine if the mix moves each respective channel as needed.
Quickly resets certain values and settings back to factory defaults. Press to backspace in
the model and user name screens.
Jumps back to the previous screen, and removes certain pop-up messages from the screen.
RIGHT SIDE BUTTONS
Adjustment of values on-screen.
Moves the cursor up, and for increasing highlighted values/settings.
Moves the cursor down, and for decreasing highlighted values/settings.
HOME SCREEN
LCD, PROGRAMMING CONTROLS, MENU NAVIGATION
