13
Disassembly, disposal
13.1
Safety during disassembly and disposal
WARNING!
Risk of injury in the event of improper disassembly!
Any residual energy still present, sharp-edged com-
ponents, sharp angles and corners on or in the sta-
tion, or on the tools required, can cause injuries.
– Ensure there is sufficient space before starting
the work.
– Handle exposed sharp-edged components with
care.
– Ensure that the workplace is clean and tidy!
Loosely stacked components and tools, or those
left lying around, can cause accidents.
– Disassembly components correctly. Observe the
high inherent weight of certain components. If
necessary, use lifting equipment.
– Secure components to ensure they do not fall
down or topple over.
– If anything is not clear, consult the Taconova
Customer Service (for contact data, see p. 3).
13.2
Disassembling the fresh water station
Before starting disassembly:
n
Switch off the fresh water station and secure it against a restart.
n
Decommission the fresh water station for an extended period
(
Chapter 11.2 ‘Shutting down the fresh water station for an
extended period (>1 month)’ on page
56).
n
Physically disconnect the full energy supply from the fresh water
station, allow any residual energy still present to discharge.
n
Remove operating materials and resources, and any remaining
materials used for work on the station, and dispose of them in an
environmentally friendly manner.
Then clean subassemblies and components correctly and dismantle
them in accordance with the applicable local occupational health and
safety regulations.
Improper disassembly
TACOTHERM FRESH PETA 2 / PETA 2 X
Disassembly, disposal
V02.2020 11/2020
Item no. 215747
EA no. 1329
Operating instructions
60
