TAC Xenta 555, Инструкция к добавке

Страница: 58 / 82

8 Engineering the TAC Xenta 555 in Vista TAC Xenta 555, Supplement Manual
58 (82) TAC AB, Oct 2006
04-00054-01-en
In this case, you can edit the project as necessary. When you finish
editing this project and send it to the Xenta Server 555, Vista
Server automatically links the XBuilder project to the Xenta
Server 555 object in the Vista database. If you have an existing
XBuilder project that you would rather use, you can discard the
new project (that is, close it without saving) and open the existing
XBuilder project. In this case, you will have to manually save the
XBuilder project to the Vista database.
4
If you opened an existing project rather than creating a new
project; on the
Vista Database menu, click Save As .
5
In the Select dialog box, locate and select the Xenta Server 555
you created in Vista Workstation.
6
Click Select .
7
If the project contains references to objects outside of the project
folders, you will receive a message. In this case, click
Yes to copy
objects to the project’s folders.
8
Send the project to the Xenta Server 555.
9
Quit XBuilder.
8.3 Verifying a TAC Xenta 555 in TAC Vista
Workstation
After sending the project to the Xenta Server 555 you can see the result
of the operation in the folders pane in Vista Workstation.