Date: 18.12.15
Manual to personal carriage decoder
WD-PW115, WD-PW 170, WD-PW-230, WD-
PW260, WD-PW290
Document: SW 3.0 / 01www.tec4trains.deSeite
18 from 42
Revolutionen im kleinen Maßstab
Once light bar WD-PW-DS has the desired length, it is connected to the main bar with the provided
4-pin cable. The cable can be connected either way; its orientation is arbitrary.
Diffusion fillets for the optical optimisation
To achieve an optimum light result, in particular in terms of the mixing of the yellow and white
source of light, it is recommended to use the attached diffusion bar. The bar is screwed together
with the light bar using the attached nylon bolts. For this purpose 2 M3 thread have to be installed
in suitable places in the diffusion bar. In general the diffusion bar is stuck with the rough side down
on the interior arrangement.
Driving trailers with common earth / minus pole
Some industrially made driving trailers already have a board which contains the red ones as well as
the white (yellow) light-emitting diodes. Should these boards have a common minus pole, a direct
wiring with the WD-PWxxx is not possible. For these cases we can recommend to use a so-called
function negator as he is offered, for example, by TAMS Elektronik at the article number 70-02000-
01.
Decoder Installation Service
Should you not trust yourself to insall the decoder and the relevant elements, then we can do this for
you.
For many vehicles we can offer an all-inclusive price.
Please contact us.
