Date: 18.12.15
Manual to personal carriage decoder
WD-PW115, WD-PW 170, WD-PW-230, WD-
PW260, WD-PW290
Document: SW 3.0 / 01www.tec4trains.deSeite
12 from 42
Revolutionen im kleinen Maßstab
All T4T-vehicle-decoders send data over the IR LED (either integrated into the TC-H0 or item IR-
Diode) via the trackto the IR receiver RMS-1, Lissy or Train Navigation.
If you have a compatible system from Uhlenbrock or Fleischmann, you will need to set the relevant
transmitting details in the locomotive's CVs 150 – 153. The values correspond with those of the
original manufacturers.
T4T's train manager TRAM will become available with SW 3. This checkback system does not only
transmit data from the locomotive but also data of each individual car and of the complete train set.
However, the data of the TRAM-system cannot be evaluated by the previously mentioned Uhlen-
brock and Fleischmann receivers. Existing receiving systems of the previously mentioned manu-
facturers will however not be influenced or disturbed.
The following vehicle data will be transmitted to the sensors (RMS-1) that need to be installed be-
tween the crossties (current range):
DCC-address of the locomotive: 16 Bit (extended or primary address)
Factory serial number of the decoders for track-occupied-message and vehicle identifica-
tion; 26 Bit (each decoder has a unchangeable number, thus making it unique; approx. 67
million numbers are reserved)
Recognition of travelling direction; 2 Bit (no double diode in track necessary!)
Speed in km/h; 9 Bit (0 – 511 km/h)
Track conditions as a cleaning feeback; 2 Bit
Train length in cm; 10 Bit (0 – 1023 cm)
special function Bit 0-3: Functional model / bit 4 – 15: Functional contents
e.g.: Train weight in t; train type, etc.
WD-PWxxx and the update feature
The carriage decoders WD-PWxxx are extended with regard to her functions constantly and are
improved, in particular also the
TCCS
. To make these innovations accessible to all users of the de-
coders, the software either work-sided or about the program adaptor "decoder manager" can be
transferred by the user even in the decoder. For an update, the wagon does not need to be opened.
The process lasts few seconds with an update about the train bus
TCCS
. The software can be
charged about our web page.
