
Date: 18.12.15
Manual to personal carriage decoder
WD-PW115, WD-PW 170, WD-PW-230, WD-
PW260, WD-PW290
Document: SW 3.0 / 01www.tec4trains.deSeite
25 from 42
Revolutionen im kleinen Maßstab
the function output 1 of a WD-GW2 decoder by the function key F2 of the TCCS- address of a cou-
pled locomotive.
First the carriage is prepared unique for the fact that the output 1 is controlled only manual, so not
through the automatic of the train fuse light. After that this output is assigned to the key F2.
Preperation: Control Output 1 of a WD-GW2 manu-
al bz F2
function
keys
measure
explenation
1
Output 1 of a WD-GWx decoder is con-
trolled by bit 7.
Output 2 is controlled by bit 6.
See the allocation table between the out-
puts and the bits in the CV 160 to CV 168
in the appendix of the decoder manual.
2
For all outputs the controlling bit must be
calculated according to point 3.
Output 1: Bit 7 = 0 (no automatic func-
tion)
Output 2: Bit 6 = 1 (automatic function(
all other bits are without function
Switch off the automatic control of the
function outputs coupled with the tail light
function and switch over to manual opera-
tion.
3
Calculate programming value:
1 x 2^7 + 0 x 2^6 = 128 + 0 = 128
When required the conversion table in the
appendix of the manual can help.
4
Couple the locomotive with the carriage to
be programmed and transmit the following
POM sequence:
locomotive address / CV 179 / value 128
locomotive address / CV 178 / value 160
First the value of the CV is programmed in
the locomotive decoder, then the destina-
tion, the CV number in the WD-GWx is
mentioned.
5
locomotive address / CV 179 / value 128
locomotive address / CV 178 / value 162
The outputs which should be controlled by
the function key F2 are defined over the
CV 162.
After this preparation the output 1 is not used any more automatically by the light control of the
locomotive. The output can be controlled now by means of F2 of the TCCS address.
Operation: Switch Output 1 of a WD-GW2 manual
with F2 of the TCCS address
function
keys
measure
explenation