OPERATING INSTRUCTIONS continued
6
SWING:
The louvre automatically turns to upright position when the appliance is first turned ON.
Press once and the air louvre will move from 90° upright position to 45° to aid clothes
drying; the SWING LED will illuminate. Press again and the air louvre will return to the 90°
angle and the SWING LED turns off .
TIMER:
Press the TIMER button through the sequence below.
Press the TIMER button to set running hours (1, 2, 4 or 8 hours). When the timer is set the
corresponding LED will illuminate displaying the time setting.
ION:
Ionizers use electricity to create negative electrons. These electrons stream into the air and
attract oxygen molecules. At this point, they become negative ions and are attracted to
airborne particles. These molecules build up around the particles until they become too
heavy to remain air borne and float to the ground.
ALARM:
The alarm will sound and the ALARM LED will illuminate if a malfunction is detected. The
appliance will shut down automatically if the internal temperature is too high. Disconnect
the appliance from the mains socket outlet and wait for 15 minutes before re-connecting
the appliance to the mains socket outlet and continuing with normal operation. If the
alarm fault continues; contact your authorised service agent immediately for further advise.
1 Hour
2 Hours
4 Hours
8 Hours
In CONTINUOUS operation the desiccant wheel will operate to remove ALL moisture
present in the air & fabric of the building. At 40%, 50% & 60% the appliance will operate to
achieve the set humidity. Once achieved, the desiccant wheel will stop operating until the
relative humidity rises above the set humidity.
