T.Werk GmbH - CHRONOS Click Pitched roof solution - Assembly instruction Page 22 of 24
6.5
Then screw in the cylinder head screw
of the CHRONOS centre clamp set with
a hexagon socket SW6 with a torque of
approx. 10 Nm (observe the specifica-
tion of the module manufacturer).
6.6
Repeat assembly steps 6.4 and 6.5 un-
til the end of the row.
6.7
At the end of the row, an additional
compensating profile must be posi-
tioned under the middle clamp set on
the free-standing side of each
CHRONOS middle clamp set.
6.8
Repeat assembly steps 6.2 to 6.7 for
each row.
