T Scale AW20, Руководство по эксплуатации

Страница: 27 / 56

AW20 Series Weighing Scale Operation Manual
- 22 -
5.8 Parts Counting
Weigh a sample to calculate the unit weight to determine the average weight of items to count,
put a known number of pieces on the scale . The balance of the total weight divided by the number
of samples and displays the unit weight.
Note:Before operation scale should be stable and return to zero, sampling available only when
weight more than 20d .
5.8.1 Manual Sampling for counting procedure
5.8.1.1 Simple Sampling

Make sure platter empty and display return to zero.
 Put a container on platter and press key if necessary.
 Place a unknown amount of pieces on the scale.
 Press key to confirm when scale stable.

The digits in the sample window will be active.
 If necessary press key to change the parts quantity (10/20/50/100).
 Press key to confirm, display show dotted line.