T Scale AW20, Руководство по эксплуатации

Страница: 19 / 56

AW20 Series Weighing Scale Operation Manual
- 14 -
5.3 Zero Setting
Zero setting allows to do by pressing key, only it’s possible when the load receptor is not in
motion.
5.4 Tare
5.4.1 Semi-automatic tare
The indicator is provided with a semi-automatic subtractive tare.
The weight of any container can be tared by pressing button so that with subsequent
weighing the net weight of the object being weighed is always displayed.
Tare Operation:
1 Load weight on the platform.
2 Press key. Zero is displayed, and tare is subtracted.
3 Remove weight on the platform. Tared weight is displayed. It can set only one tare value. It will
be shown with a minus value.
4 This Tare value can be cleared by pressing key, when there is no load on the platter.
This tare entry cannot take place, if the platter is in in motion.
5.4.2 Automatic tare
The weight of any container can be tared automatically ,to enable automatic tare function, see
parameters 2.ADVANCED SETTINGS >3. TARE SETTINGS > 1.AUTO TARE >ON.
1 Load a container on the platform, it will be heard a
“
beep
”
sound.
2 ZERO indicator and TARE indicator appears.
3 Zero is displayed in NET window,the subtracted value appears in the tare window.
4 Load the weight in the container,the NET window shows net value with a “ beep ” sound.
5 Remove weight from the platform. Tared weight is displayed. It can set only one tare value.
6 Remove the container from the platform,display show zero with a
“
beep
”
sound.