T-Rex ToneBug Totenschläger, Руководство пользователя

Страница: 3 / 5

PLUG IN, AND TUNE TO TASTE…
Using your Totenschläger
Insert a 9V alkaline battery or connect to an electrical outlet using
the T-Rex Fuel Tank power supply (not included).
Plug your guitar into the INPUT jack, and run a lead from the OUT-
PUT jack into your amp.
Use the GAIN knob to add distortion to your sound, and the LEVEL
knob to set your overall output volume.
Experiment with the LOW, MID and HIGH sliders on the 3-band
graphic equalizer to tune in your own signature distortion tone.
TECHNICAL SPECIFICATIONS:
Input Impedance @ 1KHz Higher than 1 M Ohm
Output Impedance @ 1KHz Lower than 1 K Ohm
Power supply 9V DC
Minimum Power supply Voltage 8,5V DC
Maximum Power supply Voltage 12,5V DC
Current Draw @ 9V DC 15 mA
Maximum input signal Vp/p 3,2 Vp/p
Battery Type 9V battery 6F22 Alkaline
Battery Life 8 to 12 Hours
External connectors Input Jack. Output Jack, 9V DC Jack (center
pin negative)
Controls On/Off, Gain, Low, Mid, High, Level
Depth 120 mm
Width 78 mm
Height 60 mm
Weight (excl. battery) 0,403 Kg