T.I.P. TKX 8000, Руководство по эксплуатации

Страница: 11 / 136

2
Any non-observance of this instruction bears the risk of an electrical shock which
may cause damage to persons or property.
Please inspect the device for damage occurred during transportation. In case of damage, the retailer
has to be informed immediately, at the latest within 8 days after the date of purchase.
2. Range of use
Submersible clean water pumps from T.I.P. are highly efficient electrical pumps for discharging clear,
clean or moderately dirty water containing solids up to the maximum size specified in the technical
details. These high-quality products with their convincing performance data were developed for the
multiple purposes involved with draining and pumping liquids from one place to another.
The typical ranges of application of submersible clean water pumps include: draining of ponds, basins
and storage containers as well as discharging of rain water or seepage.
Submersible clean water pumps from T.I.P. are suitable for stationary or temporary installations.
This product is intended for private use in the home area and not for commercial or industrial purposes
or for continuous circulating.
The pump is not suitable for use in table-top fountains, aquariums or similar ranges of use.
When using the unit in a pond, please take the required action to ensure that no inhabitants of the
pond will be sucked in.
The pump is not suited to discharge saltwater, faces, inflammable, etching, explosive
or other hazardous liquids. Please observe the max. temperature of the liquids to be
discharged stated in the technical data.
Inside the pump, lubricants are used which may contaminate the liquids being
discharged in case of any improper operation or damage of the device. The
lubricants used are biologically degradable and non-hazardous to health.
3. Technical Data
Model TKX 7000 TKX 8000 TKX 12000
Mains voltage / frequency 230 V ~ 50 Hz 230 V ~ 50 Hz 230 V ~ 50 Hz
Nominal performance 300 Watt 300 Watt 400 Watt
Protection type IP X8 IP X8 IP X8
Pressure port 41.91 mm
(1 ¼ “)
, male 41.91 mm
(1 ¼ “)
, male 41.91 mm
(1 ¼ “)
, male
Max. flow rate (Q
max
)
1)
7,000 l/h 7,800 l/h 12,000 l/h
Max. pressure 0.6 bar 0.6 bar 0.7 bar
Max. delivery height (H
max
)
1)
6 m 6 m 7 m
Max. submersion depth
 7 m 7 m 7 m
Max. size of the solids being pumped 6 mm 6 mm 6 mm
Max. fluid temperature (T
max
) 35 °C 35 °C 35 °C
Max. cut-in frequency in one hour 30, evenly distributed 30, evenly distributed 30, evenly distributed
Length of connection cable 10 m 10 m 10 m
Cable type H05RN-F H05RN-F H05RN-F
Weight (net) 3.6 kg 3.6 kg 4.0 kg
Min. self-priming level (A)
2)
100 mm 100 mm 100 mm
Min. suction level (B)
2)
6 mm 6 mm 6 mm
Cut-in level (C)
2)
350 mm 350 mm 350 mm
Cut-out level (D)
2)
80 mm 80 mm 80 mm
Dimensions (L x D x H) 17 x 17 x 31 cm 17 x 17 x 31 cm 17 x 17 x 31 cm
Item no. 30267 30251 30252
1)
2)
The values were determined with free, unreduced outlet.
The values between brackets refer to the illustrations given at the end of these operating instructions.
9