T.I.P. EJ 5 Plus, Руководство по эксплуатации

Страница: 11 / 40

2
Any non-observance of this instruction bears the risk of an electrical shock which may cause
damage to persons or property.
Please inspect the device for damage occurred during transportation. In case of damage, the retailer has to be
informed immediately, at the latest within 8 days after the date of purchase.
2. Range of use
Deep-well pumps from T.I.P. are specially designed and most efficient submersible pressure pumps for
discharging water from great depths. Owing to their compact design and professional technology, these pumps
can be used even in narrow bore-hole wells and shafts. These high-quality products with their convincing
performance data were developed for various applications involved with irrigation and for feeding on the liquid
being discharged under high pressure.
The units are suitable for discharging clean, clear water containing solids up to the maximum size specified in the
technical data.
The typical areas of use of a deep-well pump include: Irrigation of gardens and garden beds, domestic water
supply with grey water from wells, cisterns and reservoir tanks, the operation of irrigation systems, cleaning of
terraces and sidewalks, discharge of water from great depths water extraction from great depths.
Deep-well pumps from T.I.P. are suitable for permanent or temporary installations.
The device is not suitable for use in swimming pools or for the installation in the potable water supply.
This product is intended for private use in the home area and not for commercial or industrial purposes or for
continuous circulating.
The pump is not suited to discharge saltwater, faeces, inflammable, etching, explosive or
other hazardous liquids. Please observe the max. Temperature of the liquids to be discharged
stated in the technical data.
Inside the pump, lubricants are used which may contaminate the liquids being discharged in
case of any improper operation or damage of the device. The lubricants used are biologically
degradable and non-hazardous to health.
3. Technical Data
Model EJ 5 Plus EJ 6 Plus
Mains voltage / frequency 230 V~ / 50 Hz 230 V~ / 50 Hz
Nominal performance 1,000 Watt 1,250 Watt
Protection type IP68 IP68
Pressure port 39.59 mm (1 ¼”), female 30.93 mm (1“), female
Suction port 39.59 mm (1 ¼“), female 30.93 mm (1“), female
Max. flow rate (Q
max
)
1)
5,700 l/h 6,300 l/h
Max. pressure 4.5 bar 5.7 bar
Max. delivery height (H
max
)
1)
45 m 57 m
Max. submersion depth

17 m 17 m
Max. size of the solids being pumped 2 mm 2 mm
Max. fluid temperaturere (T
max
) 35 °C 35 °C
Max. cut-in frequency in one hour 40, evenly distributed 40, evenly distributed
Length of connection cable 20 m 20 m
Cable type H07RN8-F H07RN-F
Weight (net) ~ 11.5 kg ~ 12.7 kg
Dimensions in mm(L x D x H) 145 x 165 x 539 mm 195 x 195 x 607 mm
Item no. 30195 / 30196 30170 / 30156 / 30164
1)
The values were determined with free, unreduced outlet.
4. Scope of delivery
The scope of the delivery of this product includes:
One pump with connection cable, one operating manual. And depending on version:
Art. Nr. 30195 : a lowering rope
Art. Nr. 30156: a lowering rope, a suction hose, an intake filter with a check valve (non-return valve) and a float.
Art. Nr. 30164 and 30196: a lowering rope, electronic pressure control system BRIO 2000 M, a suction hose, an
intake filter with a check valve (non-return valve) and a float.
9