T.I.P. AJ 4 Plus 100/57 AUT, Руководство по эксплуатации, Страница: 12 / 20

2
Please inspect the device for damage occurred during transportation. In case of damage, the retailer has to be
informed immediately, at the latest within 8 days after the date of purchase.
2. Technical Data
Model AJ 4 Plus 100/57 AUT
Mains voltage / frequency 220-240 V ~ 50 Hz
Nominal performance 1,100 Watt
Protection type IP X8
Pressure port 30.93 mm
(1“), female
Max. flow rate (Q
max
)
1)
6,000 l/h
Max. pressure 5.7 bar
Max. delivery height (H
max
)
1)
57 m
Max. submersion depth 
20 m
MEI
2)
≥ 0.40
Start pressure approx. 2,4 bar
Max. size of the solids being pumped 2 mm
Max. fluid temperature (T
max
) 35 °C
Max. cut-in frequency in one hour 30, evenly distributed
Length of connection cable 23 m
Cable type H07RN8-F
Weight (net) ~ 12.6 kg
Dimensions (L x D x H) 9.8 x 9.8 x 85 cm
Item no. 30082
1)
The values were determined with free, unreduced outlet.
2.1. Information according EC guideline 2009/125/EC
2)
Minimum Efficiency Index “ (MEI) is a dimensionless variable for hydraulic pump efficiency at their best operating
point as well as with partial loading and overloading. The MEI reference value for water pumps with the best
operating efficiency is ≥ 0.70. Information on the efficiency reference value can be found under
found at.
MEI = 0.40 for Multistage Submersible 2900 rpm.
The operation of this water pump can be
more efficient and economic at different
operating points, if for example it is
controlled by means of a variable speed
controller, which adapts the pump
operation to the system.
3. Range of use
Deep-well pumps from T.I.P. are specially designed and most efficient submersible pressure pumps for
discharging water from great depths. Owing to their compact design and professional technology, these pumps
can be used even in narrow bore-hole wells and shafts. These high-quality products with their convincing
performance data were developed for various applications involved with irrigation and for feeding on the liquid
being discharged under high pressure.
The units are suitable for discharging clean, clear water containing solids up to the maximum size specified in the
technical data.
10