T-Drill PLUS 115 SS:, Инструкция по эксплуатации

Страница: 8 / 80

INSTRUCTION
MANUAL
8
Have your tool repaired only by T-DRILL – This electric tool is in accordance with the
relevant safety requirements. Repairs should be carried out only by certified persons
using original spare parts; otherwise, this may result in considerable danger to the user.
Keep tools away from items that may be damaged by magnets – The motor contains
a powerful magnet that may damage magnetic tape, credit cards, computer disks and
watches.
Use ear protectors
. During operation the noise level of the collaring machine may exceed
95dB(A).
The vibration exercised on the operator’s hand is less than 2.5 m/s.
2.3 SAFETY INSTRUCTIONS FOR TEE FORMING
Do not touch the rotating tool when the work cycle is on.
When fixing the machine to the tube, be careful not to leave your fingers between the
machine and the tube.
When handling the tools, be careful with the cutting blades. Use protective gloves.
A falling machine or tool may damage your feet. Use protective shoes.
The lubricating oil you use may cause irritation of the skin. Use protective gloves.
The fumes emitted by the lubricant may irritate your eyes and hinder your respiration.
Pay attention to an adequate ventilation.
Make yourself familiar with the contents of the safety data sheet regarding the lubricants.
The loosening chips are hot and sharp. Provide adequate protection in order not to get
damaged.
When cleaning the collar always use protecting gloves. The edges of the collar use to be
sharp.
Do not use inadequate protecting gloves, because they may get caught by the rotating
tool. Keep your hands off the dangerous area.
Every time the T-65 machine is moved, detach the power cord from the T-65 machine.
Use safety gloves when operating with the machine