T-Comfort Comfort Pro S Скачать руководство пользователя страница 96

Страница: 96 / 200

Voice over IP (VoIP)

Quick Start

External SIP Line

If your Comfort Pro S provides access to the Internet, you can an easily and quickly set up an SIP line.

Request at least one SIP account from an SIP provider.

2. Install a Media Gateway card (see

MGW Interface Card

starting on page 103).

3. Call up the Configurator and go to the page

Telephony

Ports

Slots

. Click on the corresponding slot.

Under

Configured,

select

MGC VoIP.

Optional: enter an IP address from the Comfort Pro S IP network

which is not being used, such as 192.168.99.253 under

IP Address Configured

. Click on

Apply

4. Call up the Configurator and go to the page

Telephony

Trunks

SIP Provider

. If your SIP provider is not

listed, click on

New

. Otherwise select the preconfigured SIP provider. Enter the

Name

and

Domain

(DNS

name of the SIP ID). Enter the SIP server’s IP address under

Proxy/Registrar

and an IP address under

STUN Server

and

STUN Port

where necessary. You can obtain more information on this from your SIP

provider. Click on

Apply

5. Click on the existing

“

SIP

”

account on the

Telephony

Trunks

SIP Trunks

page. Activate the

Status

and

enter a name for the account under

Name

. Select the

SIP Provider

. Enter the relevant account

information under

User name

Password

Phone No.

and

SIP ID

. Click on

Apply

The

SIP ID

setting will be used while logging in to the SIP provider. Die

Phone No.

setting denotes the

external phone number used within the public phone network. You can enter this number here to support

system administration.

6. The SIP account is now available with the dialling prefix “8”. To use the SIP account by default, call up the

page

Telephony: Trunks: Route

and select the route

External trunk.

Under

Bundle/SIP trunks 1,

select

the SIP account you have just set up. Click on

Apply

Note:

The

Telephony

Trunks

menu page is only displayed if you activate the

Level

Expert

option on the opening page of the

Configurator

7. Check that the SIP connection is active on the

System Info

Telephony

Trunks

page.

Check the functionality by making an external call. You should assign the relevant external number of the SIP

account to the internal numbers on the page

Telephony: Call distribution: Incoming

Содержание Comfort Pro S









































































































































































































Результаты поиска

Содержание Comfort Pro S

Отзывы:

Похожие инструкции для Comfort Pro S

Бренды по названию

Популярные бренды

T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Результаты поиска

Содержание Comfort Pro S

Отзывы:

Похожие инструкции для Comfort Pro S

Бренды по названию

Популярные бренды