T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Страница: 39 / 200

37
Interface Cards Installation
3. Carefully plug the interface card into its designated slot. The component side must be facing to the right.
Make sure the card is sitting firmly in the slot.
4. No connections are required for the fax function. If you want to use the V.24 function, connect the 8-pin
RJ45 plug of the provided serial cable with the RJ45 socket on the card. The other end of the serial cable
has a 9-pin Sub-D socket to connect to a printer or to a PC. It is recommended that the serial cable is laid
at the cover inner sides using the designated cable guidances. For pull relief, fasten the cable with a
cable tie to one of the square teeth under the connection panel.
5. Close the cover. Switch on the Comfort Pro S.
Configuring a Fax Card
You can view the Fax/V.24 card’s status in the Web console once you have restarted Comfort Pro S. To do
this, call up the menu item Telephony: Ports: Slots .
1. Click on the desired entry in the Slot column of the table.
2. Select the required type of card from the configured list “Fax/V.24”.
3. Enter the internal Phone No. that is assigned to the fax card.
4. Confirm with Apply .
You will see a green tick in the Status column in the table.