T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Страница: 14 / 200

12
Features
Telephony
The Comfort Pro S communications system is designed to be connected to an ISDN-basic access using the
DSS1 protocol or to be connected using DSL telephony via a SIP provider. System access (point-to-point) and
multi-terminal access (point-to-multipoint) are both supported. All types of access can be configured in
parallel. Comfort Pro S complies with legal regulations governing telecommunications equipment and fulfils
the DSS1protocol.
From its smallest version, Comfort Pro S provides the following connection options on its basic module:
■
1 external S
0
port, provided as an RJ45 socket
■
1 switchable S
0
port, provided as an RJ45 socket (external) and as a 4-pin pressure terminal (internal)
■
3 DECT-enabled U
pn
-connections for system telephones or DECT base stations (pressure terminals)
■
4 a/b-connections for analogue devices (pressure terminals)
■
Comfort Pro S can be expanded using an appropriate combination of two interface cards to 8 S
0
connections, 16 U
pn
connections or 16 a/b connections. You will find an overview of the cards available
in the section Interface Cards starting on page 33.
You can connect the following devices to Comfort Pro S:
■
analogue terminals to a/b ports
■
Euro ISDN terminals in accordance with DSS1to internal S
0
ports
■
System telephones Comfort Pro P 100, Comfort Pro P 300 and Comfort Pro P 500 to U
pn
ports
■
VoIP system telephones Comfort Pro P 300 IP and Comfort Pro P 500 IP, can be connected using LAN
and an additional Media Gateway card.
■
Base stations Comfort Pro CB 300 for DECT mobile phones to DECT-enabled U
pn
ports
Comfort Pro S can be integrated into an existing network (LAN) and be used from all workstations as Internet
access router. VoIP integration and the connection to an existing EMail system is possible.
The Comfort Pro S is configured and programmed using a special web browser (the Web console), which can
be run on a connected PC.
Comfort Pro S can be configured and maintained by the Deutsche Telekom service centre using remote
configuration.