T-COM Speedport OptoLAN, Руководство пользователя, Страница: 23 / 32

Getting started 7
Speedport OptoLAN / T-Com_en / A31008-M1062-A151-2-7419 / starting.fm / 12.09.2006
Version 2, 23
.0
5.2005
To do this, press the upper part of the cutter downwards (arrow).
Connecting
1. Place the two Speedport OptoLANs in the required positions.
2. Lay the POF cable.
Please note the following advice before installing the POF cable in your
home.
The transparent fiber core transmitting the data in your POF cable is
protected from external damages by a plastic coating. To ensure a
smooth operation of your devices when using the POF cable, you
should protect the cable from mechanical or chemical stresses which
could damage or destroy its plastic coating.
You can easily lay the POF cable at home under carpets, behind
shelves, or in the edge between walls and the floor. Doing so, please
ensure that you do not place any heavy items on the POF cable and
that you do not bend it down to less than 25 mm.
For the installation of the POF cable on plain surfaces, all mechanical
methods are suitable which do not cave or crimp the cable and ensure
an adherence to the given bending radius. Avoid the attachment with
staples, nails, or similar metallic items that expose the POF cable to
high pressure during and after the installation process.
Note Route the two wires through two adjacent holes on the
cable cutter. As you do so, make sure that the two wires
are the same length.
Note Ensure that the clips on the Speedport OptoLAN are open,
i.e. that they are in the lower position.