SCREWING ABSORBERS
These instructions are for the following products: spectrum A10, spectrum A20, spectrum P816.
Open the package carefully! Inserting sharp objects
into the package can damage the absorber. Avoid
using long, sharp tools for opening the package!
UNBOXING
While determining the mounting positions, it helps
to mark the walls and ceiling using a level and
tape measure, in order to achieve even spacing in
relation to corners and sound sources.
DETERMINE THE
MOUNTING POSITION
Carefully remove the products from the package and
remove the protective film. Also remove the drilling
template and mounting clips and set them aside.
REMOVE PRODUCTS
FROM PACKAGING
The following tools are needed for installation:
✓
Box Cutter/
✓
Folding ruler or
✓
(Electric) Screwdriver
utility knife
tape measure
✓
Anchors (6-8)
✓
Level
✓
Electric drill
✓
Screws
✓
Pencil
✓
Drill bits
Make sure to use the correct type of anchors for your
mounting surface (drywall, masonry, concrete, etc.).
TOOLS
MOUNTING INSTRUCTIONS
EN
