T+A M 10, Руководство пользователя

Страница: 44 / 54

44
Approved usage
This device is designed exclusively for reproducing
sound and/or pictures in the domestic environment. It is
to be used in a dry indoor room which meets all the
recommendations stated in these instructions.
Where the equipment is to be used for other purposes,
especially in the medical field or any field in which safety
is an issue, it is essential to establish the unit’s suitability
for this purpose with the manufacturer, and to obtain prior
written approval for this usage.

equipment which includes a radio or television
receiving section must be operated within the stipulations
laid down by the Post Office and the Telecommunications
authorities in the country in which it is used.
This unit may only be used to receive or reproduce those
transmissions which are intended for public reception.
The reception or reproduction of other transmissions (e.g.
police radio or mobile radio broadcasts) is prohibited.

The only permissible method of disposing of
this product is to take it to your local collection
centre for electrical waste.
Care of the unit:
Disconnect the mains plug from the wall socket before
cleaning the turntable.
To clean the machine simply wipe the surfaces with a
soft, damp cloth or sponge. Do not rub the surfaces with
a dry cloth. Please just use clean water to moisten the
cloth, or water with a small addition of a mild cleaning
agent such as a neutral cleaner, soft soap or similar.
Never use any organic solvent which might contain
materials such as paint thinners, alcohol or lighter fuel.
Before using the unit again be sure to check that there
are no short-circuits at the connections, and that all con-
nectors are correctly fitted and firmly inserted.
Approval and conformity with EC
directives
In its original condition the unit meets all currently valid
European regulations. It is approved for use as stipulated
within the EC.
By attaching the CE symbol to the unit  declares its
conformity with the EC directives 2006/95/EC and
2004/108/EC and the national laws based on those
directives.
The original, unaltered factory serial number must be
present on the outside of the unit and must be clearly
legible! The serial number is a constituent part of our
conformity declaration and therefore of the approval for
operation of the device.
The serial numbers on the unit and in the original 
documentation supplied with it (in particular the
inspection and guarantee certificates), must not be
removed or modified, and must correspond.
Infringing any of these conditions invalidates 
conformity and approval, and the unit may not be
operated within the EC. Improper use of the equipment
makes the user liable to penalty under current EC and
national laws.
Any modifications or repairs to the unit, or any other
intervention by a workshop or other third party not
authorised by
 , invalidates the approval and
operational permit for the equipment.
Only genuine  accessories may be connected to the
unit, or such auxiliary devices which are themselves
approved and fulfil all currently valid legal requirements.
When used in conjunction with auxiliary devices or as
part of a system this unit may only be used for the
purposes stated in the section
' Approved usage ' .
FCC Information
to the user
(for use in the United
States of America only)
Class B digital device – instructions:
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and
receiver.
-
Connect the equipment into an outlet on a circuit
different form that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV
technician for help.