T+A HV Series, Руководство пользователя

Страница: 57 / 78

57
The Configuration for a Wired Ethernet LAN or Power-Line LAN connection
Setting the Parameters for a
Wired Network  Connect the SDV 3100 HV to an operational network or Power-Line modem
using the LAN socket on the back panel.
 Switch the SDV 3100 HV on, Open the System Configuration menu by
pressing the

button on the remote control handset or the 
button on the front panel of the SDV 3100 HV .

Use the

/

buttons to select the menu point “ Network ”, then
confirm your choice with the

button.

If necessary select under the menu item " Interface " the option " LAN "
 You should now see the menu reproduced below, displaying the network
parameters.

You can now select the individual menu points and adjust them to match
your network conditions. The illustration below shows the possible button
inputs after each menu item.
Possible entries

/

: Switching ON / OFF
(0...9): Numeric input, separating dots are automatically generated;
input limited to valid addresses
(0...9, A...Z): Alpha-numeric input and special characters.
IP - separating dots must be entered as special characters.
 The parameters illustrated above are only typical values.
Addresses and settings may require different values for your network.