T+A HV Series, Руководство пользователя

Страница: 22 / 78

22
D/A-Converter settings of the SDV 3100 HV
A number of special settings are available for the
SDV 3100 HV D/A converter; they are designed to fine-tune the
characteristics of your amplifier to suit your listening preferences.. This settings are described in detail in the
following chapter.
Calling up and operating the
menu

To call up the menu, press and hold the

button on the F3100 .

To call up the menu on the front panel, touch the  button and select
the menu item " D/A configuration " with the SELECT knob and press it to
access the menu.

When you open the menu, the following Select points appear on the
screen:
Using the front-panel controls:

The SELECT knob is used to select any item within the menu system.

To change a selected menu item, press the SELECT knob to confirm your
choice, then adjust the value by rotating the knob.

After making the adjustment, press the SELECT knob again to adopt the
new setting.

You can interrupt the process at any time by touching the  button; in
this case any changes you have made are discarded.

Holding the SELECT knob pressed in takes you one level further down in
the menu system.

Touch the  button again to quit the menu.
Using the remote control handset:

Use the

/

buttons to select an item in the menu.

If you wish to change a selected menu item, first press the

-button , and then use the

/

-buttons to alter it.

After making the change, press the

-button again to accept the
new setting.
 You can press the

-button at any time to interrupt the process; the
change is then abandoned.

Press the

button again to leave the menu.