T+A HA 200, Руководство пользователя

Страница: 47 / 56

System settings
Meter mode Under this menu item the display mode of the meters can be set.
The following measurement types are available:
Input level -
Level of the input signal
Output level -
Level of the output signal
Temperature -
Temperature monitor of the device and the
Class A output stages
Signal quality
- Displays the quality (frequency deviation and error rate) of
the input digital signal.
Meters off - Meters switched off
j
For detailed information on the various meter settings and display types, refer to chapter
„Meters“ on page 50.
Source
configuration
Under this menu item, sources which are not needed can be deactivated.
Deactivated sources can no longer be called up using the source buttons on the device
and the remote control.
After calling up this menu item with the button, a list of all sources of the HA 200
appears.
Each source is followed by a remark indicating whether the source is activated (ena-
bled) or deactivated (disabled).
Display
brightness
Here you can adjust the brightness of the display during normal operation to your per-
sonal preferences in 9 steps.
Display mode
Here you can set whether the display will be switched on permanently or only tempora-
rily, when the device is being operated.
If the setting
temporary is selected, the display is switched on during operation of the
HA 200 only and then automatically switched off again after a short delay.
If the
Always ON setting is selected, the display remains permanently on.
Colour profile
Under this menu item you can adjust the brightness of the status LEDs and the bright-
ness and illumination color of the meters to your personal preferences.
Select the menu item
Default colours to reset the displays to the default settings.
Energy saver
The energy saving mode can be switched on and off here.
The machine has an Auto Power Down function.
If the
ECO option is selected, the HA 200 automatically switches to standby mode if no
music signal and no operation is detected for more than 60 minutes.
If the
Comfort setting is selected, the unit remains switched on until it is manually swit-
ched to standby mode.
j
In Ländern außerhalb der EU in denen die EuP Richtlinie nicht gilt, kann die automatische
Abschaltung des Gerätes (Einstellung ECO) bei Bedarf deaktiviert werden.
Device info
Menu item to display the installed firmware versions and the option to reset the device
to the factory default settings.
47