T+A HA 200, Руководство пользователя

Страница: 44 / 56

Play / Pause
next track
previous track
Playback
Analogue source
• If necessary, first reduce the set volume.
• Select the analog input to which you have connected the source device to be played using the source
selection buttons on the device or the remote control.
• As soon as the source device delivers music, the music signal will become audible.
Digital source
• If necessary, first reduce the set volume.
• Select the analog input to which you have connected the source device to be played using the source
selection buttons on the device or the remote control.
• As soon as the source device delivers digital music data, the HA 200 automatically adjusts itself to the
format and sampling rate of the signal, and you will hear the music.
Bluetooth
• If necessary, first reduce the set volume.
• Select the Bluetooth source by pressing the IN5/BT source button twice if necessary.
• In order to play music from a Bluetooth capable device via the HA 200, the external device must first be
connected to the HA 200.
• The HA 200 is ready for connection when message Bluetooth not connected is displayed.
• If a device is already connected, the existing connection must first be disconnected.
• If the HA 200 is found, connect it to your mobile device.
• Playback can now be started on the mobile device.
• Some Bluetooth devices can also be controlled by the HA 200‘s FM8 remote control. The operation and
behaviour of the connected device depends on the device itself. Usually the buttons on the FM8 remote
control have the following functions:
j
For Bluetooth playback, the supplied antenna must be connected to the „BT ANT“ socket on the back of the
device.
If your device requests a PIN code, this should always be ‘0000’.
The mobile device must support the A2DP Bluetooth audio transfer protocol if you wish to transfer Bluetooth
audio from a mobile device to the sound system.
44