6
The emergency tether can be fastened on the driver’s wrist. If there is an accident and the rider falls
off, the tether will pull out and stop the engine.
Tire and Tire gauge
Tire: Proper tire pressure provides maximum stability and proper tire wear.
Check the tire pressure on a regular basis and inflate when needed.
To find the tire size and standard pressure, please check parameter list and warning label on the
vehicle. To find the “Load-bearing” and “speed grade”, please check the tire surface.
1. Check tire pressure and condition before each ride. If the rim is bend or there are any other
damaged areas on the rim, please replace it. (Seek assistance from qualified technician or local
retailer for replacement.)
2. Improper tire pressure will result in hazards. Too much air pressure can cause the tire to go flat. Not
enough air pressure can cause tire to deform and overheat, and resulting in less grip and a higher risk
of accidents.
3. When the tire-tread wearing is over 2mm, please replace the tire. (Seek assistance from qualified
technician or local retailer for replacement.)
Tire gauge (optional): The manufacturer will provide a gauge to measure tire pressure.
The tire gauge is put on the key ring of the key switch for the users' convenience.
Checking the pressure:
Unscrew valve cap, place the gauge onto the nipple and hold down until you
get a reading. This number will be the tire pressure. If the number is too low, add air with a tire pump.
If the number is too high, hold the gauge onto the tire valve until you get to the desired number.
Replace the valve cap and screw it on after measuring.
The position of spare parts, parameter, Electrical diagram, age warning and other warning labels and
plates.
Содержание KXD505
Страница 10: ...10 service syxmoto com ...
Страница 13: ...service syxmoto com 13 ...