SerialGate User Guide
37
Connecting to SerialGate
In order to view current SerialGate’s settings or modify them, you need to make a Web or Telnet
connection to SerialGate. IP address is required information to make a connection.
There are two ways you can know the current IP address of SerialGate.
If SerialGate’s WAN port uses assigned IP address from DHCP server or is set to a fixed IP address,
SerialGate supports the following options in case that a user does not know IP address.
For SG-1040/1080/1160
1. A user can connect to SerialGate LAN port’s default IP address; “10.10.1.1”.
2. A user can search IP address pre-set to SerialGate using “Detector” application enclosed in Utility &
Documents CD and connect to SerialGate.
WAN Default IP address: 192.168.0.223
SerialGate’s default IP address is set to 192.168.0.223. In order to
connect with this address, you need to change network
configurations so that your PC can connect to the IP 192.168.0.223.
Please refer to an example below, and note that values don’t
necessarily have to be identical to the example below.
LAN Sub IP address: 10.10.1.1
For SG-1010/1020, LAN port’s virtual IP address is 10.10.1.1 while
LAN port’s default IP address for SeroalGate-1040/1080/1160 is
10.10.1.1. In order to connect with this address, you need to change
network configurations so that your PC can connect to the IP
10.10.1.1.
Please refer to an example below, and note that values
don’t necessarily have to be identical to the example below.
ECHIPAMENTE PENTRU AUTOMATIZĂRI
Electric Film S.R.L. — Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu
VÂNZĂRI ▪ 0364 710319 ▪ [email protected] ▪ SUPORT TEHNIC ▪ 0788 250583
cele mai sensibile
37/110
