SystemBase Eddy Series, Руководство пользователя

Страница: 56 / 89

Chapter 4. Integration
4.3 Connecting to Eddy with IP address
In order to view current Eddy’s settings or modify them, you need to make a Web or Telnet connection
to Eddy. IP address is required information to make a connection.
There are two ways you can know the current IP address of Eddy.
First is to use a built-in, alias IP address of “10.10.1.1”.
Second is to use “Detector” application provided in the Utility & Documents CD. This application
allows searching for Eddy modules on the network.
◆
The factory default IP address: 192.168.0.223
Eddy’s default IP address is set to 192.168.0.223. In order to connect with this address, you need to
change network configurations so that your PC can connect to the IP 192.168.0.223. Please refer to an
example below, and note that values don’t necessarily have to be identical to the example below.
Figure 4-1 Connecting to the default IP address
4-3