6.3.2 Installation procedure
1
Prepare the surface where the unit is to be mounted. Make sure that the surface is flat, levelled and that
it supports the weight of the unit. Perform the installation in accordance with local rules and regulations.
2
Lift the unit in place.
Warning
Beware of sharp edges during mounting and maintenance. Make sure that a proper lifting device is
used. Use protective clothing.
3
Level the unit with help of the enclosed mounting
feet
4
Connect the unit electrically to the mains through
the all pole circuit breaker (safety switch), which
is enclosed inside the unit on delivery. The wiring
between the safety switch and the unit is led
through the top of the unit casing directly to the
electrical connection box.
See enclosed wiring diagram, and chapter 6.4.2.1,
table 2 for more information.
Warning
The units electrical connection to the mains supply must be preceded by an all pole circuit breaker
with a minimum 3 mm gap.
Danger
• Make sure that the Mains supply to the unit is disconnected before performing any maintenance or
electrical work!
• All electrical connections must be carried out by an authorized installer and in accordance with
local rules and regulations.
Installation instructions
208767
10
Systemair Sverige AB
