SystemAir TFE, Инструкция по установке, эксплуатации и обслуживанию

Страница: 9 / 36

4 Installation
4.1 To do before the installation
of the product
• Make sure that you have the necessary installation
accessories:
– Refer to 13 Accessory overview page 28 for an over-
view of the accessories.
– If you install the product outdoors, it is necessary to in-
stall a weather protection roof.
– To decrease vibrations transmitted from the product to
the duct system, Systemair recommends to install vi-
bration dampers, fast clamps or flexible connections.
– If you install the product with free suction or free dis-
charge, it is necessary to install a protection grille.
Make sure that the safety distance agrees with the
standard DIN EN ISO 13857 and the standard DIN
24167–1.
• Use installation material with fire resistance rating for the
installation location.
• Examine the packaging for transportation damage and re-
move the packaging from the product carefully.
• Examine the product and all components for damage.
• Make sure that the motor effect and the fan performance
agrees with the expectations at the installation location.
• Make sure that the information on the name plate and the
motor name plate agrees with the operation conditions.
• Install the product in a location where there is space for
commissioning, troubleshooting and maintenance.
• Make sure that the installation location is clean and dry,
for full safety during electrical work.
• Make sure that the installation surface has sufficient ca-
pacity to hold the weight of the product.
• Refer to the airflow direction arrows on the name plate or
on the product to install the product in the correct position.
• Make sure that all cable glands are tight against the ca-
bles to prevent leaks.
4.2 To install the product
4.2.1 To install the TFSR fan
Note:
Make sure the installation location has space for mainte-
nance, and that the roof joints can hold the weight of the
product.
1 Install the product so that unwanted vibrations are not
transmitted to duct systems or roof beams.
Note:
Systemair recommends to install the product together with
a roof curb TOS or TOB. The roof curbs are available as
accessories.
2 If a roof curb is used, refer to www.systemair.com for in-
structions how to install roof curb TOS or TOB.
3 Attach the fan on to the roof curb with 4 screws.
4 Connect the primary electric supply to the connection
box of the product. Refer to
12.3 Wiring diagrams page
18 .
4.2.2 To install the TFSK fan, the
TOE fan, the TOV fan, and the
TFE fan
Note:
The product must be installed horizontally.
Note:
Make sure the installation location has space for mainte-
nance, and that the roof joints can hold the weight of the
product.
1 Install the product so that unwanted vibrations are not
transmitted to duct systems or roof beams.
Note:
Systemair recommends to install the product together with
a roof curb. The roof curb is available as an accessory.
2 Attach the fan directly on to the roof curb with 4 screws.
7