26/48 | User Manual S-BM2 | 202010
DBH
Installation in the Duct Made of Promatect Boards
S-BM2 smoke control damper can be installed on “single” (tested according to EN 1366-9) or “multi” (tested according
to EN 1366-8) ductwork. If mounted on a duct classified with lover fire resistivity, the fire resistivity of S-BM2 smoke
control damper will be decreased to the duct level. This section does not depict duct hanger rules as those are
dependent on the weight of the duct itself and must be statically approved. Smoke control dampers must be suspended
from solid ceiling slabs using adequately sized threaded rods. When using anchors in the ceiling, use fire rated anchor
(with suitable fire rating certificate). Suspension systems longer than 1,5 m require fireresistant insulation.
IMPORTANT:
The suspension of the damper must be loaded only with the weight of the damper
The interior of the S-BM2 smoke control damper must remain accessible for maintenance,
it may be necessary to create additional inspection panels in the connecting ducts.
The maximum resistivity for in duct installation is EI120S with pressure level 2 (-1000 Pa … 300 Pa)
Dimension
Range
(mm)
Classification
Supporting
Construction
Construction Type/Minimal Thickness (mm)
Allowed
Blade Axis
Orientation
In the Duct
200 × 425
up to
1000 × 1225
EI90 (v
ed
i ↔ o) S1000 C
mod
MAmulti
Horizontal
duct
EN 1366-9,
EN 1366-8
EI90 (h
od
i ↔ o) S1000 C
mod
MAmulti
Vertical
duct
-
EI120 (v
ed
i ↔ o) S1000 C
mod
MAmulti
Horizontal
duct
EN 1366-9,
EN 1366-8
EI120 (h
od
i ↔ o) S1000 C
mod
MAmulti
Vertical
duct
-
1
Smoke control damper S-BM2
2
Connected ductwork made of Promatect-L500 boards (min. 500 kg/m
3
, Promat)
5
Nails or pins per ductwork manufacturer instructions
6
Fire resistive coating Promat K84 (Promat)
13
Cover plate made of Promatect (Promat)
14
Accessory K1-S-BM2-W×H (size of damper:
W
= nominal width;
H
= nominal height)
X, Y
Cutting planes
Horizontal blade axis orientation of the damper
Vertical blade axis orientation of the damper
Legend for figures of
Installation
